NEWS
Large Contract Completed in China

Chemco have recently completed a substantial ballast tank refurbishment contract in China, covering over 40,000m².

The project involved high pressure water jetting (1000 bar) the substrate to prepare the surface, with inaccessible areas prepared by mechanical preparation. This was followed by a stripe coat and touch-up coat of our revolutionary Epo-chem™ RS 500P coating system.

High pressure water jetting and mechanical preparation were selected as the surface preparation methods due to the tight time schedule given to complete this project. Utilising abrasive blasting would have increased the overall cost of the project as well adding to the time for project completion due to equipment requirements and set-up/dismantling times.

Epo-chem™ RS 500P, a solvent-free, wet & rust tolerant epoxy primer/finish coat, was selected as the coating system to be used. Using this environmentally friendly system ensured that no downtime would occur between surface preparation completion and the beginning of the coating process. This was possible due to the wet & rust tolerant properties of the coating system, which allows immediate application to soaking wet and rusty prepared surfaces.

Applying this system on rusty of poorly prepared and wet surfaces has no adverse affect on the coating’s performance. The adhesion value of this wet & rust tolerant product actually outweighs that of conventional solvent-based paints.

The benefits of using this system can be seen below:

  • Solvent-free (odourless) coating system
  • No grit blasting
  • No humidity or dew point restrictions
  • Can be applied on soaking wet and rusted surfaces
  • No extensive equipment requirements
  • No disruption to other ongoing work (including hot work)
  • Significantly reduced H&S and Fire Precautions
  • Reduced contract duration
  • No over-coating limitations
heavily corroded ballast tank internals

After Surface Preparation

grey patch repair of ballast tank internals

Completed Application

2019-04-30T15:52:43+01:00

Contact Our Specialist Coating Advisors

Our coating specialists can suggest the right solution for your specific application.

Contact Coatings Advisor
View Our Brochure
Go to Top